product
s1000
characteristic
● lead-free compatible fr-4.0 laminate● tg155℃（dsc）, uv blocking/aoi compatible
● excellent thermal reliability
● z-cte 30-50% less than conventional fr-4.0
● excellent t/h reliability
● low water absorption
application area
● computer, instrumentation, vcr, communication equipment, automotive electronics, electronic game machine, and etc.- product performance
- product certificate
- data download
| items | method | condition | unit | typical value | |
|---|---|---|---|---|---|
| tg | ipc-tm-650 2.4.25 | dsc | ℃ | 155 | |
| td | ipc-tm-650 2.4.24.6 | 5% wt. loss | ℃ | 335 | |
| cte (z-axis) | ipc-tm-650 2.4.24 | before tg | ppm/℃ | 49 | |
| after tg | ppm/℃ | 250 | |||
| 50-260℃ | % | 3.4 | |||
| t260 | ipc-tm-650 2.4.24.1 | tma | min | 60 | |
| t288 | ipc-tm-650 2.4.24.1 | tma | min | 10 | |
| thermal stress | ipc-tm-650 2.4.13.1 | 288℃, solder dip | -- | 100s no delamination | |
| volume resistivity | ipc-tm-650 2.5.17.1 | after moisture resistance | mω.cm | 7.4 x 108 | |
| e-24/125 | mω.cm | 5.6 x 106 | |||
| surface resistivity | ipc-tm-650 2.5.17.1 | after moisture resistance | mω | 7.6 x 107 | |
| e-24/125 | mω | 2.8 x 106 | |||
| arc resistance | ipc-tm-650 2.5.1 | d-48/50 d-4/23 | s | 147 | |
| dielectric breakdown | ipc-tm-650 2.5.6 | d-48/50 d-4/23 | kv | 45 | |
| dissipation constant (dk) | ipc-tm-650 2.5.5.9 | 1mhz | -- | 4.9 | |
| iec 61189-2-721 | 10ghz | -- | — | ||
| dissipation factor (df) | ipc-tm-650 2.5.5.9 | 1mhz | -- | 0.011 | |
| iec 61189-2-721 | 10ghz | -- | — | ||
| peel strength (1oz hte copper foil) | ipc-tm-650 2.4.8 | a | n/mm | — | |
| after thermal stress 288℃, 10s | n/mm | 1.4 | |||
| 125℃ | n/mm | 1.2 | |||
| flexural strength | lw | ipc-tm-650 2.4.4 | a | mpa | 540 |
| cw | ipc-tm-650 2.4.4 | a | mpa | 450 | |
| water absorption | ipc-tm-650 2.6.2.1 | e-1/105 d-24/23 | % | 0.09 | |
| cti | iec60112 | a | rating | plc 3 | |
| flammability | ul94 | c-48/23/50 | rating | v-0 | |
| e-24/125 | rating | v-0 | |||
remarks:
1. all the typical value is based on the 1.6mm specimen,while the tg is for specimen≥0.50mm.
2. all the typical values listed above are for your reference only and not intended for specification. please contact shengyi technology co., ltd. for detailed information. all rights from this data sheet are reserved by shengyi technology co., ltd.
explanation: c=humidity conditioning, d=immersion conditioning in distilled water, e=temperature conditioning
the first digit following the letter indicates the duration of preconditioning in hours, the second digit the preconditioning temperature in ℃ and the third digit the relative humidity.